Sony HD-FLX9W User Manual

SERVICE MANUAL
DVD DECK RECEIVER
E Model
SPECIFICATIONS
HCD-FLX9W
Ver 1.0 2004.07
9-877-904-01
2004G05-1
© 2004.07
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
HCD-FLX9W is the amplifier, DVD player, tape deck and
tuner section in DHC-FLX9W.
Amplifier section:
The following measured at AC 127, 220, 240 V,
50/60 Hz (Saudi Arabian model only)
The following measured at AC 120, 220, 240 V,
50/60 Hz (except for Saudi Arabian model)
MULTI mode
DIN power output at stereo mode (rated)
45 + 45 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker: 60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Center speaker: 60 watts
(16 ohms at 1 kHz, 10%
THD)
Rear speaker: 60 + 60 watts
(6 ohms at 1 kHz, 10%
THD)
Sub woofer: 100 watts
(8 ohms at 100 Hz, 10%
THD)
2.1CH mode
DIN power output at stereo mode (rated)
70 + 70 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker: 120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Sub woofer: 240 watts
(8 ohms at 100 Hz, 10%
THD)
Inputs
VIDEO/SAT IN L/R (phono jacks):
voltage 250 mV/450 mV,
impedance 47 kilohms
OPTICAL DIGITAL IN (Square optical connector
jacks, rear panel) :
wavelength −−−−
MIC (phone jack) : sensitivity 1 mV,
impedance 10 kilohms
Outputs
VIDEO OUT L/R (phono jacks):
voltage 250 mV,
impedance 1 kilohms
VIDEO OUT: 1 Vp-p, 75 ohms
S VIDEO OUT: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms
P
B: 0.7 Vp-p, 75 ohms
P
R: 0.7 Vp-p, 75 ohms
PHONES (stereo mini jack):
accepts headphones of
8ohms or more
FRONT L/R: Use only the supplied
speaker SS-FLX9
REAR L/R: Use only the supplied
speaker SS-RS99
CENTER: Use only the supplied
speaker SS-CT99
S.WOOFER: Use only the supplied
speaker SS-WG9
Disc player section
Laser Semiconductor laser
(DVD and SA-CD:
λ=650 nm,
CD: λ=780 nm)
Emission duration:
continuous
Frequency response DVD (PCM 48 kHz):
2 Hz − 22 kHz = (±1 dB)
CD: 2 Hz − 20 kHz =
(±1 dB)
– Continued on next page –
Model Name Using Similar Mechanism HCD-FLX5D
DVD
DVD Mechanism Type CDM53N-DVBU14
Section
Base Unit Name DVBU14
Optical Traverse Unit Name DBU-1
TAPE
Model Name Using Similar Mechanism HCD-FLX5D
Section
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

Sony HD-FLX9W Specifications

General

Frequency Response	20 Hz - 20 kHz
Input Sensitivity	200 mV
Ethernet	Yes
Total Harmonic Distortion	0.09%
Bluetooth	Yes
Wi-Fi	Yes
Impedance	6 Ohms

Summary

SPECIFICATIONS

Amplifier section

Details of audio output power, impedance, and THD for stereo and multi-channel modes.

Disc player section

Technical specifications for the laser, frequency response for DVD and CD playback.

SECTION 1 SERVICING NOTES

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

Precautions for handling the optical pick-up due to electrostatic discharge sensitivity.

NOTES ON LASER DIODE EMISSION CHECK

Guidelines for safely checking the laser diode emission, emphasizing distance observation.

UNLEADED SOLDER

Characteristics and handling advice for unleaded solder used in the appliance.

SECTION 3 DISASSEMBLY

DISASSEMBLY FLOW

Step-by-step guide outlining the sequence for disassembling the unit.

SECTION 4 ASSEMBLY

SECTION 5 TEST MODE

[COLD RESET]

Procedure to clear all data and reset the unit to initial conditions.

[GC TEST MODE]

Mode to check software version, FL tube, LEDs, keyboard, and VACS.

[MC TEST MODE]

Mode to check operations of the amplifier, tuner, and tape sections.

[DVD TEST MODE GENERAL DESCRIPTION]

Overview of the DVD test mode for diagnosis and adjustment using on-screen display.

SECTION 6 MECHANICAL ADJUSTMENTS

Torque Measurement

Table detailing torque specifications for various mechanical adjustments and parts.

SECTION 7 ELECTRICAL ADJUSTMENTS

DECK SECTION

Adjustments for the tape deck section, including head demagnetization and torque measurements.

RECORD/PLAYBACK HEAD AZIMUTH ADJUSTMENT

Procedure for adjusting the playback head azimuth for optimal audio signal alignment.

SECTION 9 EXPLODED VIEWS