30
US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Left
7 Adjust the volume.
Adjust the volume level of the
headphones first. Then, adjust the
volume level of the headphones
with (volume) +/– on the remote
control.
To remove the paired
headphones from the device list
1 Press HOME.
The home menu appears on the TV
screen.
2 Select [Setup] - [Advanced
Settings] on the home menu.
3 Select [Bluetooth Settings] - [Device
List].
4 Move the cursor to the name of the
headphones that you want to remove,
and then press DISPLAY.
To remove all the paired headphones
from the device list, press AUDIO.
5 Follow the on-screen instructions to
remove the desired headphones from
the device list.
To display the paired headphones on the
device list, Set [Setup] - [Advanced
Settings] - [Bluetooth Settings] - [Bluetooth
Mode] to [Transmitter].
1 Set the BLUETOOTH function of the
headphones to on.
2 Press HOME.
The home menu appears on the TV
screen.
3 Select [Setup] - [Advanced
Settings] on the home menu.
4 Select [Bluetooth Settings] -
[Bluetooth Mode] - [Transmitter].
The speaker system enters
BLUETOOTH transmission mode and
the speaker system automatically
reconnects to the headphones that
was most recently connected to.
5 Return to the home menu, select
[Watch] or [Listen], and
select the input.
The image of the selected input
appears on the TV screen, [BT TX]
appears in the front panel display,
then the sound is output from the
headphones.
Sound from the speaker system is
muted at the same time.
6 Adjust the volume.
Adjust the volume level of the
headphones first. Then, adjust the
volume level of the headphones
with (volume) +/– on the remote
control.
Note
Listening to Sound with
Paired Headphones
010COV.book Page 30 Wednesday, November 25, 2020 3:33 PM
To Next Page
Loading...
