Notes
• To input multi ch:mnel digitM audio lrom the DVD
player, set the digital audiu output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• As this receiver dues not have aualug audio input
jacks li)r DVD. connect your DVD player to the
DIGITAL COAXIAL DVD IN jack on the
receiver. To output sound from front left/right
speakers only, press 2CH.
• When cunnecting uptical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie uptical digital cords.
Tips
• All the digital audio jacks are cumpatihle with
32 kHz. 44.1 kHz. 48 kHz. and 96 kHz sampling
frequencies.
• The sound of the TV is output from the speakers
connected to the receiver if you connect the audio
output jacks of the TV and the TV AUDIO IN.jacks
of the receiver.
20G8
To Next Page
