Listeningto FM/AMradio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 21).
Tip
The tuning scale differs depending on the area code
as shown in the following table. For details on area
codes, see page 3.
Area code FM AM
CEL. CEK. SP 50 kHz 9 kHz
U. CA 100 kHz 10 kHz _"
MX. AR 5(1 kHz 10 kHz
E51 50kHz 10 kHz*
_The AM tuning scale can be changed (page 61).
FM MODE
2
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
Press TUNING + or TUNING -.
Press TUNING + to scan from low to
high; press TUNING - to scan from high
to low.
The receiver stops scanning whenever a
station is received.
46 G8
To Next Page
Loading...
