Tip
Surround speaker position is designed specifically
for ilnplemeutation of the Cinema Studio EX modes.
For other sound fields, speaker position is not so
critical.
Those sound fields were designed under the premise
that the surround speakers would be located behind
the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However. if the
speakers are pointing toward the listmmr from the
immediate lelt and right of the listening position, the
surround elTccts become unclear unless set to
"SIDE/LO" or "SIDE/HF'.
Nevertheless. each listmfing environment has many
variables, such as wall reflections, and you may
obtain better results using "BEHD/HF' if your
speakers are located high above the listening
position, even if they are located to the immediate
left and right.
Therefore. although it may result in a setting
contrary to the ahove explanation, we recommend
that you playback multi channel surround encoded
soltware and select the setting that provides a good
sense of spaciousness and that best succeeds in
fl_rmiug a cohesive space between the surround
sound l?om the surround speakers and the sound of
the front speakers. If you are not sure which sounds
best. select "BEHD/LO" or "BEHD/HI" and then
use the speaker distance parameter and speaker level
adjustments to obtain proper balance.
• DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps.
Calibratingthe
appropriatesettings
automatically
(A. CALmenu)
For details, see "6: Calibrating the appropriate
settings automatically (AUTO
CALIBRATION)" (page 23).
3
O
o
39G8
To Next Page
