Sony HT-DDW790 - Using Only the Front Speakers; Sub Woofer; Resettingsoundfields to the Initial Settings

Usingonlythe front
speakersandsubwoofer
(2C1-1STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers and sub
woofer.
When nmlti channel surround formats are
input, the signals are downmixed to 2 channel
with bass frequencies being output from the
sub woofer.
When standard 2 channel stereo sources are
input, the receiver's bass redirection circuitry
will he activated. The front channel bass
frequencies will be output l¥om the sub
woofer.
2CH
Press 2CH.
Resettingsoundfields to
the initial settings
Be sure to use tile buttons on the receiver for
this operation.
1,2
2
1
2
Press I/_ to turn off the
receiver.
While holding down 2CH, press
I/_.
"S.F. CLR." appears on tile display and
all sound fields are reset to their initial
setting.
m
_=.
o
e-
e"
e_
o
e,
45 G8