Warning codes and solutions
Warning Explanation Solution
code
WARN. 40 The euvir(mment Make sure the
is uuisy, euviroumeul is
quiet during Aulu
Calibration.
WARN. 50 Thecemerspeaker Be sure Io cunnecl
is nel cunnecled, the cenler speaker.
WARN. 51 The surruund Be sure to cunuecl
speakers fire uu[ the SUlTOUUd
cunuecled, speakers.
WARN. 60 The front speakers Repusitiou your
balance are oul of front speakers, c)
range.
WARN. 62 Theceuterspeaker Repusitiun your
level is uul (if ceuler speaker, d)
range.
WARN. 63 The surround left Repusitiuu your
speakerlevel is uut surround lelt
of range, speaker, e}
WARN. 64 The surruundright Repusitiun your
speakerlevel is uut surrour_d right
of range, speaker, j)
WARN. 70 The lront speakers Repusitiuu yore7
distance are oul uf front speakers, c/
range.
WARN. 72 Theceuterspeaker Repusitiun your
dislance is oul of cenler speaker, d)
range.
WARN. 73 The surround left Repusitiuu your
speaker dislance is surround lelt
out uf range, speaker, e)
WARN. 74 The surruundright Repusitiun your
speaker dislance is surround right
out ul range, speaker, f/
C/Fur details, refer "Front speakers distance"
(page 37).
d)For details, relcr "Center speaker distance"
(page 37).
e/For details, reler "Surround left speaker distance"
(page 38).
I)For details, refer "Surround right speaker
distance" (page 38).
7:Adjustingthespeaker
levelsandbalance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiveremploys a test tone with a frequency
centered at 800Hz.
2-!
MASTER
4
! Press AMP MENU.
"I-LEVEL" appears on the display.
Press (_ or * to enter the
menu.
3 Press ,i,14,repeatedly to select
"T. TONE".
4 Press (+) or ._,to enter the
parameter.
26G8
To Next Page
