Sony HT-DDW790 - Page 7

About the indicators on the display
Name Function
[] SW Lights up when audio signal is
output l)'om the SUB WOOFER
jack.
[] LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Elli:ct)
channel and the LEE channel
signal is actually being
reproduced.
[] Flit D Lights up when the receiver is
decoding Dolby Digital signals.
[] Oft PL/ "Oft PL" lights up when the
DO Pkll receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
"Flit PLII" lights up when the
Pro Logic 11Movie/Music
decoder is activated.
[] OPT Lights up when VIDE() 2 input
is selected. However.
"UNLOCK" appears on the
display if no digital signal is
input through the OPTICAL
jack.
Name Function
[] DTS
[] MEMORY
Lights up when the receiver is
decoding DTS signals.
Lights up when a memory
flmction, such as Name Input,
Preset Memory (page 48), etc..
is activated.
[] Tuner
Indicators
[] Preset
station
indicators
[] D.RANGE
[] COAX
Lights up when using the
receiver to tune in radio stations
(page 46), etc.
Note
"RDS" appears 17)rmodels of
area code CEL. CEK only.
Lights up when using the
receiver to tune it; radio stations
you have preset. For details on
presetting radio stations, see
page 48.
Lights up when dynamic range
compression is activated (page
34).
Lights up when DVD input is
selected. However.
"UNLOCK" appears on the
display il no digital signal is
input through the COAXIAL
jack.
0
tD
5'
o.,
continued_
7G8