Sony ICF-2001D - Main Board Disassembly; Accessing Main Board Components

ICF-2001D/2010
MAIN BOARD (3)
(4) Lift up the jack board by releasing jack rings from
case holes and by releasing slide switch knob from
control knob grooves.
Do
not
break
4
(four)
lead
wires
of
ferrite-rod
antenna.
jack board
@ Lift up main board by releasing switch and control slides
from switch and control knobs.
Do not break 4 (four) lead wires of ferrite-rod antenna.
MAIN BOARD (2)
@ Remove three screws.
+BTP3x35
+BTP3x8
+BTP3x8 claw main board
@ Unlock chassis claws from main board.