Sony ICF-7800 - Page 7

| ICF-78¢
5
Switch Board Removal
@) Release the claw with
a slot-screwdriver.
oN
es
—$——<—<$—SSS
SSS
(4) Release the claws and
Main
Board
Removal
remove
the
main
board.
@) Unsolder the
lead wires.
H :
HES @) adhesive tape
ss
When installing the main
oe a be sure to arrange
the lead wires as shown
right.
UY
@) Unsolder the lead wires.
Note: After replacing the main board, dial
film calibration should be performed.
fon page 9)
;
F