Sony ICF-C2W User Manual

_ US Model
AEP Model
ICF-C2W
~ Canadian Model
—ICF-C2 W/C25W
Photo: ICF-C2W (White type) .
SPECIFICATIONS | | FEATURES
Frequency range US,Canadian model: - Electronic digital:alarm clock and sleep timer are
FM:87.6—108MHz combined.
ere ela eae 7 - Two wake-up modes available:radio or buzzer alarm.
Saga aay ged Oi die _ + DREAM BAR (REPEAT ALARM bar), operable with a
Antennas FM: AC power cord antenna, AM: Built-in feather-light touch, offers three functions: snooze alarm,
ferrite bar antenna sleep timer turn off,and instant alarm time readout.
Speaker
Approx.
6.6
cm
(24/2
inches)
dia.
Ue
a
ti
Mae
thee
they
ocean
haere
hatstadis
a
mayb
deectesk
ens
cede
Power
output
200
mW
(at
10%
harmonic
distortion)
Power requirements US, Canadian model:
120V AC,60Hz
AEP,WG model: 220V AC, 50Hz
Power consumption . 6WAC(3W AC when only the clock is in
. operation)
Dimensions (incl. projecting parts and controls)
Approx. 192 x 66 x 131 mm
(wihid)
| ) (75/8 x 27/a x 54/4 inches)
Weight Approx. 800 g (1 Ib 13 oz)
Time Display
12 hours: US,Canadian model
24 hours: AEP,WG model
WG model : West Germany model
MICROFILM

Sony ICF-C2W Specifications

General

Type	Clock Radio
Brand	Sony
Model	ICF-C2W
Display Type	LED
Tuning	Analog
Snooze Function	Yes
Tuning range FM	87.5 - 108 MHz
Tuning range AM	530 - 1710 kHz
Radio Bands	FM/AM
Power Source	AC
Backup Battery	Yes
Alarm Function	Yes
Speaker impedance	8 Ohm
Power requirements	120V AC, 60Hz
Speaker	Built-in

Summary

Specifications Overview

Features Overview

Safety Check-out Procedures

Leakage Test

Tests AC leakage from exposed metal parts to earth ground and between parts. Exceeding 0.5 mA is not permitted.

Model Identification

Section 1 General Operations

Parts Identification

Identifies all external buttons, controls, speaker, and display elements on the device.

Setting the Current Time

Detailed steps on how to set the current time, including zero-second adjustment.

Radio Operation

Instructions for operating the radio, including tuning and volume adjustment.

Setting the Alarm Time

Sleep Timer Operation

Section 2 Pointer Setting

Section 3 Electrical Adjustments

AM Section Adjustments

Procedures for adjusting AM section alignment, frequency coverage, and tracking.

FM Section Adjustments

Procedures for adjusting FM section alignment, frequency coverage, and tracking.

Section 4 Diagrams

Printed Wiring Boards

Layouts for semiconductor components and printed wiring boards for the main and switch boards.

Schematic Diagram

Detailed schematic diagram of the main board, including component connections and voltage points.

Section 5 Exploded View

Section 6 Electrical Parts List