Sony ICF-SW11 - 2-3. DIAL POINTER SETTING

— 5 —
2-3. DIAL POINTER SETTING
3 Screw
(1.7 × 3) Flat (+) special
2 Mach the hole with setting
the variable capacitor gear gap
in the arrow A direction.
1 Turn the variable capacitor
fully counterclockwise.
5 Scale, dial
4 Belt (Tun)
A
7 First, turn the tuning shaft fully in the arrow A direction.
Move only the dial pointer in the arrow B direction and
set it on the center of the scratched lines on the dial scale plate.
Apply suitable locking compound to C portion.
6 Pointer
Knob (Tun)
Center of
scratched line
A
C
B