To Next PageTo Next Page
Need help?Do you have a question about the Sony ICF-SW1005 and is the answer not in the manual?
General| Frequency Range FM | 76 - 108 MHz |
|---|---|
| Power Source | 4 x AA batteries or AC adapter |
| Headphone Jack | 3.5 mm |
| Type | Portable receiver |
| Speaker | Built-in |
| Antenna | Telescopic antenna |
Covers Worldtime, Preset, Direct, Manual, and Scan Tuning features.
Highlights Editable Labels, Timer Standby, Sleep Timer, and Power Sources.
Precautions for unit handling, temperature, moisture, heat, and electrical safety.
Notes on reception difficulty and interference issues.
Identification and function of controls and indicators on the front panel.
Identification and function of controls and connectors on the rear panel.
Explanation of each button on the control panel and its operation.
Meaning of indicators like Tuning, STEREO, SYNC, LOCK, STANDBY, SLEEP.
Explanation of indicators for Key Protect, Battery Empty, Label, World Time, DST.
Guide to inserting batteries, replacement notes, and battery life.
Using the AC power adaptor for operating the unit.
Using the optional car battery cord for operation.
Step-by-step instructions to set the radio's local current time.
Precise time setting and managing daylight saving time.
A reference table showing time differences between various locations and UTC.
How to view the time in different cities around the world.
Method to tune in stations stored in memory using page and button selection.
Guidance on using antennas for optimal MW, LW, SW, and FM reception.
Procedure for tuning stations by entering their exact frequencies.
Details on inputting frequencies, TRY AGAIN message, and tone/mode selectors.
How to tune stations by stepping through frequencies manually.
Instructions for receiving Single Side Band and Continuous Wave signals.
Utilizing synchronous detection to minimize interference and distortion.
Steps to initiate and use the automatic scan tuning feature.
Process for saving tuned stations to preset memory locations.
How to modify or remove stations from memory presets.
Overview of the label editing process and controls.
Detailed steps for editing labels for stations and time differences.
Procedure to set the radio to turn on automatically at a preset time.
How to set, check, and change multiple standby timer settings.
Instructions for setting the radio to automatically turn off after a duration.
Connecting and operating the AN-100 active antenna for better reception.
Instructions for setting up and using the AN-71 compact antenna for reception.
Connecting AN-1/AN-102 controller for SW reception via ACTIVE ANT jack.
Connecting AN-1/AN-102 coupler for MW/LW reception.
Guide to connecting the radio's output to a cassette recorder for recording.
Details on circuit system, frequency ranges, and intermediate frequencies.
Information on speaker output, power requirements, and battery life.
Dimensions, mass, and list of supplied accessories.
Solutions for power not turning on and display malfunctions.
Troubleshooting steps for audio problems and poor signal reception.
Resolving problems with frequency input, key input, and timer settings.
Concise overview of clock setting, world time, and DST operations.
Quick reference for preset and direct tuning procedures.
Quick reference for manual tuning, scan tuning, and preset management.
Quick reference for label editing, standby, and sleep timer functions.
