Presetting frequency cannot
be
input.
•ENTER is not pressed
when
you
press the
PRESET
/DIRECT TUNE
buttons.
~
To
input
a frequency, while pressing the ENTER, press
one
of
the
PRESET
/DIRECT TUNE buttons.
No key input is acceptable.
•The
KEY
PROTECT
o-n
button has been pressed.
~
Press this button
again
to
make
o-n
mark
disappear.
The
preset station cannot be received
when
preset tuning.
•Incorrect preset button is preset.
•The
preset station is erased.
~
Preset the station again.
The
radio
Is
not
tumed
on
at
the
timer-setting time.
•The
tim~r
is not in
the
standby
mode.~
Press the STANDBY 1
or
STANDBY 2 button.
•The
MAIN POWER
ON/OFF
switch is set to OFF.
•When
it took more than 10 minutes to replace batteries, the timer
setting time
has
been erased.
~
After replacing the batteries, set the
timer
again.
•
To Next Page