Sony ICP-X1116 - System Configuration Data File Operations; Target Category Menus; Loading a File

343
For details, see “To select a region” (page 340).
Selection of a region is not required in the shotbox,
mac
ro, and macro attachment categories.
3 Press the [Select] button in the [Package] group.
The [Select Package] window appears.
4 Select a package and press [OK].
To select the default package
Press the [Default Package] button.
5 In the [Package] group list, select the target file to
rename.
To select and rename multiple files, place a check
m
ark beside the target files to rename.
To select and rename all files, place a check mark in
t
he Select All checkbox.
You can also press the [Select File(s)] button and
en
ter a file number in the numeric keypad window.
• Selection of a file is not required in the macro
a
ttachment category as there is only one file.
Pressing the [Search] button searches for the file
n
ame and displays only the corresponding files.
• Searching is not available for key snapshots, wipe
sn
apshots, DME wipe snapshots, and macro
attachment categories.
6 Press the [Rename] button.
The [Rename] window appears.
7 Press the input field and enter a file name (up to 8
characters) using the keyboard.
8 Press [OK].
The file is renamed.
System Configuration
Data File Operations
Target Category Menus
System configuration data file operations are performed
using the Home > File > System Config menu.
The following submenus are used for each category.
This section describes the system configuration data
menu a
s an example.
Loading a File
Files in categories where loading is locked cannot be
loaded.
1 Open the Home > File > System Config > Config >
Load menu (10106.11).
The name of the most recently loaded package and
t
he free space in storage are displayed at the top right.
2 Press the [Select] button in the [Package] group.
The [Select Package] window appears.
3 Select a package that includes the target file to load
and press [OK].
To select the default package
Press the [Default Package] button.
4 Press the [Load] button.
5 Check the message, then press [OK].
The file is loaded.
Note
Notes
Categories Level 4 > level 5 Menu
number
System
co
nfiguration
Config > Load 10106.11
Config > Save 10106.12
Config > Copy 10106.13
Config > Browse Files 10106.14
User accounts User Account > Load 10106.21
User Account > Save 10106.22
User Account > Copy 10106.23
User Account > Browse
F
iles
10106.24
Note