Help Guide
Interchangeable Lens Digital Camera
ILCE-6700 α6700
Save/Load Settings
You can save/load camera settings to/from a memory card. You can also load settings from another camera of the same
model.
Menu item details
Load:
Loads the settings from a memory card to this camera.
Save:
Saves the current settings of this camera to a memory card.
Delete:
Deletes the settings saved on a memory card.
Settings that cannot be saved
The following setting parameters cannot be saved using the [Save/Load Settings] function. (Menu items without setting
parameters, such as, [Focus Magnifier], are not listed.)
(Shooting)
Copyright Info
(Exposure/Color)
External Flash Set.
White Balance: Custom 1/Custom 2/Custom 3
(Focus)
Face Memory
(Network)
WPS Push
Access Point Set.
Wi-Fi Frequency Band
IP Address Setting
Edit Device Name
Access Authen. Settings
(Setup)
Area/Date/Time Setting
Note
You can save up to 10 settings per memory card. When 10 settings have been already saved, you cannot perform [Save New].
Delete the existing settings using [Delete], or overwrite them.
You cannot load settings from a camera of a different model.
MENU →
(Setup) → [Reset/Save Settings] → [Save/Load Settings] → desired item.
1
To Next Page
Loading...
Need help?
General
