Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM5 α7RV
Focus Standard
If you press the key to which [Focus Standard] is assigned, you can recall useful functions such as automatically
focusing on a subject in the center of the screen in accordance with the focus area settings.
Examples of [Focus Standard] key functions
When [
Focus Area] is set to any of the following parameters, pressing the key moves the focusing frame back to
the center of the monitor or to the subject you are tracking:
[Zone]
[Spot: S]/[Spot: M]/[Spot: L]
[Expand Spot]
[Tracking: Zone]
[Tracking: Spot S]/[Tracking: Spot M]/[Tracking: Spot L]
[Tracking: Expand Spot]
When [
Focus Area] is set to [Wide], [Center Fix], [Tracking: Wide], or [Tracking: Center Fix], pressing the key in
the autofocus mode makes the camera focus on the center of the screen. If you press the key while recording a
movie with manual focus, you can temporarily switch to autofocus and focus on the center of the screen.
Note
You cannot set the [Focus Standard] function to [Left Button], [Right Button] or [Down Button] of the control wheel.
Related Topic
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
Selecting the focus area (Focus Area)
5-044-866-11(1)
Copyright 2022 Sony Corporation
MENU →
(Setup) → [Operation Customize] → [ Custom Key/Dial Set.] or [ Custom Key/Dial Set.]
→ desired key, then assign the [Focus Standard] function to the key.
1
Press the key to which [Focus Standard] is assigned.
What you can do by pressing the key varies depending on the setting for [
Focus Area].
2
To Next Page
Loading...
