Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM5 α7RV
Vertical grip
You can attach a vertical grip (sold separately) to this product and record vertically oriented images. When attaching the
vertical grip, remove the battery cover in advance.
For details, refer to the operating instructions for the vertical grip.
To remove the battery cover
Pull the battery cover release lever (A) in the direction of the arrow, and then remove the battery cover.
To attach the battery cover
Insert the shaft on one side of the battery cover into the attachment site, and then push in the battery cover by attaching
the shaft on the opposite side.
You can attach the removed battery cover to the vertical grip so that you do not lose it.
When a vertical grip is attached to this product, the battery remaining is displayed as
.
Note
The LA-EA4 Mount Adaptor (sold separately) and the vertical grip are not designed to be attached at the same time. If you attach
them at the same time, the space between the Mount Adaptor and the vertical grip will become narrow, making the camera
difficult to hold.
5-044-866-11(1)
Copyright 2022 Sony Corporation
To Next Page
Loading...
