To use different functions for the dials/wheel depending on the shooting mode
If you add a check mark to [Separate M mode and other modes.] when assigning functions to the dials/wheel, you can
assign different functions for [Manual Exposure] and the other exposure modes ([Intelligent Auto]/[Program
Auto]/[Aperture Priority]/[Shutter Priority]).
If you add a check mark to [Separate Flexible Exp. and Intelligent Auto.] when assigning functions with [ Custom
Key/Dial Set.], you can assign different functions for [Flexible Exp. Mode] and [Intelligent Auto].
Hint
You can also assign shooting functions to the focus hold button on the lens. However, some lenses do not have a focus hold
button.
Related Topic
Changing the function of the dial temporarily (My Dial Settings)
Fn Menu Settings
Using the function menu
5-044-866-11(1)
Copyright 2022 Sony Corporation
You can also select [ Custom Key/Dial Set.] and [ Custom Key/Dial Set.] from MENU → (Setup) →
[Dial Customize].
Move to the [Rear1] screen using the top/bottom side of the control wheel. Then, select [AEL Button] and
press the center of the control wheel.
2
Select [Subject Recognition AF] using the top/bottom/left/right side of the control wheel, and then press the
center.
If you press the AEL button while shooting and the subject is recognized, [Subject Recognition AF] will activate
and the camera will focus on the subject. Shoot images while holding down the AEL button.
3
To Next Page
Loading...
