The following functions cannot be used when [Bluetooth Rmt Ctrl] is set to [On].
Power-saving mode
If the function does not work properly, check the following notes and then try pairing again.
Ensure that the camera is either not connected to any other device or connected to only one device using Bluetooth
communication. (Up to 2 devices can be connected to the camera at the same time.)
Confirm that [Airplane Mode] for the camera is set to [Off].
If the function does not work properly even after you have performed the above operations, delete the pairing information for
the device that you want to connect using [Manage Paired Device] on the camera.
Related Topic
Bluetooth Settings
5-044-866-11(1)
Copyright 2022 Sony Corporation
To Next Page
Loading...
