For a registered access point, press the right side of the control wheel on the access point selection screen.
Priority Connection:
Select [On] or [Off].
IP Address Setting:
Select [Auto] or [Manual].
IP Address:
If you are entering the IP address manually, enter the set address.
Subnet Mask/Default Gateway/Primary DNS Server/Second DNS Server:
If you have set [IP Address Setting] to [Manual], enter each address according to your network environment.
Hint
When you select a registered access point, [Priority Connection] for that access point becomes set to [On], prioritizing
connections to that access point.
The prioritized access point is marked with a
(crown) icon.
Note
Once an access point is registered, [Priority Connection] for that access point is set to [On]. If you want to stop preferentially
connecting to a certain access point, set [Priority Connection] for the access point to [Off].
Related Topic
WPS Push
Using the keyboard
5-044-866-11(1)
Copyright 2022 Sony Corporation
To Next Page
