While charging the headset units / While charging the charging case
(lights up in orange)
When the battery is fully charged when charging starts on the headset units/charging case
- - - - - (lights up in orange for about 1 minute, and then turns off)
When the battery becomes fully charged and charging is complete
- - - - - - - (turns off)
During charging, when the charging case lid is opened or closed / When the headset units are set in or removed from
the charging case
- - - - - - (lights up in orange while charging. turns off for about 0.5 seconds,
and then lights up in orange again)
Abnormal charging temperature
- - - - - - - - - - - - - - - (repeatedly flashes twice in orange)
When an error occurs while charging and charging cannot be performed
- - - - - - - - - - (repeatedly flashes slowly in orange)
Abnormal combination of left and right headset units
- - - - - - - - - - - - (repeatedly flashes 3 times in orange)
Pairing connection status
Pairing mode
- - - - - - - - - - - - - - (repeatedly flashes twice in blue)
Connection process completed
... (flashes 10 times in blue)
Indicates when one or both headset units are stored in the charging case.
Others
Reset start preparation / Initialization start preparation
- - - - - - - - - (repeatedly flashes slowly in orange for up to about 5 seconds about 15
seconds after you first press the reset/initialize button on the back of the charging case)
For details, see “Resetting the headset” or “Initializing the headset to restore factory settings”.
Initialization completed
- - - (flashes 4 times in green)
For details, see “Initializing the headset to restore factory settings”.
Hint
When the headset is worn, you can check various statuses of the headset by the notification sound or voice guidance.
The connection indicator on the USB transceiver
Wireless 2.4 GHz connection and software update status
Pairing mode of the wireless 2.4 GHz connection
- - - - - - - - - - - - - - - (repeatedly flashes twice in white for up to 5 minutes)
When a wireless 2.4 GHz connection is not established/wireless 2.4 GHz connection is established and the mode
switches to the Bluetooth mode
- - - - - - - - - - - - - - - (repeatedly flashes in white at about 1.4-second intervals for about 30 seconds)
The wireless 2.4 GHz connection is established
(lights up in white)
To Next Page
Loading...
