Hint
When receiving a call when using a smartphone or mobile phone, some smartphones or mobile phones may receive a call on the
phone instead of the headset. Transfer the call to the headset on your smartphone or mobile phone.
You can also talk hands-free even when you are wearing only one headset unit. When you receive an incoming call, answer the
call using the headset unit you are wearing. If you put the other headset unit into the other ear while you are talking with only one
headset unit, you can talk with both headset units.
Note
In the factory settings, the headset does not accept incoming calls from Bluetooth connected devices when the headset is in the
USB transceiver mode. “INZONE Hub” allows you to switch modes to accept incoming calls even when the headset is in the USB
transceiver mode.
Depending on the connected device or playback application you are using, playback may not pause even when you receive an
incoming call while playing back music. When you receive an incoming call while playing back music, playback may not resume
automatically even if you finish the call.
Use a smartphone or mobile phone at least 50 cm (19.69 in.) away from the headset. Noise may result if the smartphone or
mobile phone is too close to the headset.
In order to make it easier for you to hear your own voice during a phone call, the microphones work to capture ambient sounds
(Sidetone function). If your voice sounds too loud or the sounds in your surroundings are bothering you, turn off [SIDETONE] on
“INZONE Hub”.
The volume during calls cannot be adjusted with the headset. Adjust the volume on the connected device.
Depending on the caller’s voice characteristics or the ambient environmental noises, the call sound quality may be reduced.
Related Topic
Using only one headset unit
How to make a wireless connection to Bluetooth devices
Making a call
Functions for a phone call
5-052-425-11(1) Copyright 2023 Sony Corporation
If no ring tone is heard via the headset
The headset may not be connected with the smartphone or mobile phone over CCP. Check the connection status
on the smartphone or mobile phone.
Operate the smartphone or mobile phone to adjust the volume.
3
When you have finished your call, tap the touch sensor on the left or right headset unit twice quickly (at
about 0.3-second intervals between taps) to end the call.
If you received a call during music playback, music playback resumes automatically after ending the call.
4
To Next Page
Loading...
