Help Guide
Wireless Noise Canceling Gaming Headset
INZONE Buds
Listening to music from a device via a Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and control the device from your
headset via a Bluetooth connection.
TMAP (Telephony and Media Audio Profile)
You can control the streaming for smartphones, headset, left and right standalone earbuds, speakers, TVs, and
more.
MCP (Media Control Profile)
You can play or stop music.
VCP (Volume Control Profile)
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Put the headset units into your ears.
See “Wearing the headset” for how to wear the headset in your ears.
1
Connect the headset to a Bluetooth device.
2
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Tap the touch sensor on the right headset unit to adjust the volume.
Increase the volume: Tap the touch sensor on the right headset unit during music playback.
As you repeatedly tap the touch sensor, the volume increases step by step according to the number of taps.
Lower the volume: Hold your finger to the touch sensor on the right headset unit during music playback to lower
the volume continuously. Release your finger from the touch sensor at the desired volume level.
4
To Next Page
Loading...
