Help Guide
Wireless Noise Canceling Gaming Headset
INZONE Buds
About the voice guidance
In the factory settings, when the headset is worn in your ears, you will hear the English voice guidance via the headset.
You can change the language of the voice guidance and turn the voice guidance on/off using “INZONE Hub”.
When the headset units are removed from the charging case during pairing mode and then put into your ears:
“Pairing”
When the headset turns into the BLUETOOTH® mode: “Bluetooth mode”
When the headset turns into the USB transceiver mode: “USB Transceiver mode”
When the headset cannot be switched from a USB transceiver connection to a Bluetooth connection: “Connection
switching is not completed. Please check the connecting device.”
When the remaining battery charge of the headset is low: “Low battery”
When automatically turning off due to low battery of the headset: “Battery is empty”
When the headset microphones are turned on: “Mic On”
When the headset microphones are turned off: “Mic Off”
Note
When you initialize the headset to restore to the factory settings after you change the language of the voice guidance, the
language will also return to the factory settings.
If the voice guidance is not heard after changing the voice guidance language or updating the software of the headset, set the
headset units into the charging case, and close the charging case lid to turn them off, then remove the headset units from the
charging case to turn them on again.
5-052-425-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
