Help Guide
Wireless Noise Canceling Gaming Headset
INZONE Buds
The headset is turned off automatically.
If the IR sensor of the headset cannot detect that the headset is being worn because the headset is not being worn
properly, the earbud tips are not attached properly to the headset or the IR sensor is dirty, the automatic power off
function may be activated and automatically turn off the headset. Put the headset units into your ears so that they fit
snugly in your ears. If the IR sensors are dirty, clean them with a soft dry cloth.
When the automatic power off function is set to [OFF] on “INZONE Hub”, wearing detection will continue to work and
the symptom may be improved.
Make sure the battery is fully charged.
Related Topic
Location and function of parts
Wearing the headset
Charging
Checking the remaining battery charge
5-052-425-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
