Sony IPELA PCS-G70 Quick Connection Guide

Main indicators that appear
during communication
Controlling a remote camera
Local microphone is turned off
Sending a still image
Receiving a still image
Sending or receiving a computer screen
Sending or receiving data from a
whiteboard
Sending dual video
3-986-676-13(1) 2005 Sony Corporation
Video Communication System PCS-G70/G70P
Quick Connection Guide Using Speed Dial
To begin with
Turn on your Video Communication System and TV monitor, and check the following to ensure
that connection is possible.
Is the picture of your camera
(local picture) on the monitor
screen?
After checking...
Let’s connect
1
Verify the “LINE I/F”.
Select the
type of line
to use.
2
Select the Number text
box and press PUSH
ENTER.
3
Select “Dial” and
press PUSH ENTER.
4
The system dials and
establishes
communication.
Note: Connection to a remote
party is not possible if neither
the IP address nor ISDN
indicator is displayed.
Number buttons
Number text box
Dial
DISPLAY
(CLEAR) button
PinP
(BACKSPACE)
button
V/v/B/b (arrow)
buttons and
PUSH ENTER
button
CONNECT/
DISCONNECT
button
button
(enter dot)
Press.
Line I/F
Enter the IP
address or line
number.
Or press .
To change
When using the ISDN
Are one or more ports of the
ISDN indicator highlighted?
3
Select “Information”
and press PUSH
ENTER
2
1
When using the LAN
Is the LAN indicator
highlighted and is the IP
address displayed?
3
For details on operations, refer to the Operating Instructions
(stored in the supplied CD-ROM).

Sony IPELA PCS-G70 Specifications

General

Frame Rate	Up to 30 fps
Supported Protocols	H.323, SIP
Video Coding Format	H.264
Audio Codec	G.722, G.711
Network Interface	10BASE-T/100BASE-TX (RJ-45)
Video Input	Composite
Video Output	Composite
Audio Input	1x 3.5mm mini-jack
Data Ports	RS-232C