Why does my Sony KV-HR32K90 TV have double images or ghosts?
If your Sony TV shows double images or “ghosts”, it may be due to broadcast signals reflected by nearby mountains or buildings. Try using a highly directional antenna or using the fine tuning (“Fine”) function to improve the picture. Adjusting the antenna direction can also help. If you're using a booster, turning it off or disconnecting it may resolve the issue.
How to align picture to the screen on Sony KV-HR32K90?
If the picture on your Sony TV is not aligned to the screen, it might be due to magnetic disturbance from external speakers or other equipment, or the earth’s magnetic field. Keep external speakers and other electrical equipment away from the TV. You can also adjust the picture position by going to the “Picture Position” menu under the “Setup” menu and adjusting “Picture Rotation” and “Picture V- Position” to align the picture.
What to do if my Sony TV cannot receive stereo broadcast signal?
If your Sony TV cannot receive stereo broadcast signals, first check the stereo reception setting. Press A/B until “Auto” appears on the screen. Also, ensure that you are not accidentally listening to the sound of the right picture when TWIN pictures are displayed by pressing or .
Why is there no color on my Sony KV-HR32K90?
If your Sony TV displays no color, first, check the color level setting. Go to the “Picture” menu, select “Personal” of “Picture Mode”, and adjust the “Color” level under “Picture Adjustment.” If the color level is adequate, the color system setting may be incorrect. Access the “Setup” menu and verify the color system (“Color System”) setting, typically set to “Auto”. Adjusting the antenna direction can also help.
How to fix dotted lines or stripes on Sony TV screen?
If your Sony TV shows dotted lines or stripes, it's likely due to local interference from sources like cars, neon signs, hair dryers, or power generators. Avoid using such equipment near the TV. Adjusting the antenna direction may also minimize interference.
How to resolve distorted picture and noisy sound on Sony KV-HR32K90?
If your Sony TV displays distorted pictures and noisy sound, it could be due to broadcast signals being too strong. To resolve this, access the “Channel Setup” menu under the “Setup” menu and select “Manual Program”. Then, select “Sensitivity: Low”. Also, if you're using a booster, try turning it off or disconnecting it.
Why does my Sony TV have a good picture but no sound?
If your Sony TV has a good picture but no sound, first, make sure the volume isn't too low by pressing +. Also, check if the sound is muted and press to cancel muting. If neither of these resolves the issue, the broadcast signal may have a transmission problem; try pressing A/B until you hear better sound. Finally, ensure you're not accidentally selecting the sound of the right picture when TWIN pictures are displayed by pressing or .
What to do if my Sony TV has no picture and no sound?
If your Sony TV shows no picture and has no sound, first check that the power cord, antenna, and VCR are properly connected. Also, ensure that the TV is turned on by pressing on the remote. If it still doesn't turn on, press on the TV to turn it off for about five seconds, then turn it on again.
Why is there noisy sound on my Sony TV but the picture is good?
If your Sony TV displays a good picture but has noisy sound, the TV system setting might be incorrect. If the sound is noisy on all channels, go to the “Channel Setup” menu under the “Setup” menu and select “Auto Program” to preset the channels again. If only some channels have noisy sound, select the specific channel, then go to the “Channel Setup” menu under the “Setup” menu and choose the appropriate TV system (“TV System”). Also, ensure that you are not accidentally listening to the sound of the right picture when TWIN pictures are displayed by pressing or .
How to fix snowy picture and noisy sound on Sony TV?
To address snowy pictures and noisy sound on your Sony TV, start by checking the antenna cable and its connections at the TV, VCR, and wall. The issue might stem from a loose connection or a damaged cable. If the connection is fine, the channel presetting may be inappropriate or incomplete. To resolve this, access the “Channel Setup” menu under the “Setup” menu and choose “Manual Program” to preset the channel again. It's also crucial to ensure that you're using the correct antenna type (VHF/UHF). If problems persist, try adjusting the antenna direction or using a booster to improve signal transmission.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | CRT |
| Aspect Ratio | 16:9 |
| Tuner | Analog |
| Resolution | 1080i |
| Sound Output | 20W |
| Inputs | Composite, S-Video, Component |
To Next Page