Getting Started
13
GB
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET.
3 Press M or m repeatedly to set the hour.
4 Press ,.
5 Press M or m repeatedly to set the
minute.
6 Press ENTER.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET.
2 Press M or m to select “CLOCK SET”, then
press ENTER.
3 Do the same procedures as step 3 to 6
above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
You can change the on-screen display language.
1 Turn on your TV and select the video
input.
2 Press ?/1 to turn on the system.
3 Press DVD to switch the function to
DVD.
4 Press DVD SETUP in stop mode.
5 Press M or m repeatedly to select
“LANGUAGE SETUP”, then press
ENTER.
6 Press M or m repeatedly to select
“OSD”, then press ENTER.
7 Press M or m repeatedly to select a
language from the displayed list, then
press ENTER.
Setting the clock Selecting a language
To Next Page
Loading...
Need help?
General
