Tuner
41
GB
Listening to non-preset radio
station
— Manual Tuning
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING –/+ (or –m or M+ on
the unit) repeatedly to tune in the
desired station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE on the unit repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.
• Press and hold TUNING –/+ (or –m or M+ on
the unit). The frequency indication changes and
scanning stops when the system tunes in a station
(Automatic Tuning).
• To record the radio programs, use manual recording
(page 44) or timer recording (page 51).
Notes
• The OSD does not appear on the screen except for
DVD function.
• When “DVD” is selected as the current function and
TUNER/BAND is pressed to select “TUNER”
during “DVD PWR OFF”, it may take some time to
switch the function.
To Next Page
Loading...