DVD/VIDEO CD/CD/MP3/JPEG – Play
17
GB
Resuming playback from the
point you stopped the disc
— Resume Play
This system memorizes the point where you
stopped the disc so you can resume from that
point. Resume Play is not canceled when you
turn off the system.
1 While playing a disc, press x to stop
playback.
“RESUME” appears in the display. If
“RESUME” does not appear, Resume Play
is not available.
2 Press nN.
The player starts playback from the point
you stopped the disc in step 1.
Notes
• You cannot perform Resume Play during Shuffle
Play or Program Play.
• Depending on where you stopped the disc, the
system may resume playback from a different point.
• Resume play is canceled when:
– you press x in stop mode.
– you disconnect the power cord.
– you open the disc tray.
– you change the play mode.
– you change the settings using the DVD DISPLAY
or DVD SETUP button.
Playing a track by entering the
track number (on the remote
only)
Press the number button(s) to enter the track
number of the track you want to play. (To enter
the MP3 audio track number, press ALBUM –
or + repeatedly to select the desired album
before entering the number.)
To enter a track number over 10
1 Enter the corresponding digits.
To enter 0, press 10/0.
2 Press ENTER.
Example:
To play track number 30, press 3 and 10/0, then press
ENTER.
To play MP3 track number 100, press 1, 10/0 and 10/
0, then press ENTER.
To Next Page
Loading...
Need help?
General
