Sony MHC-V4D - Troubleshooting and Diagnostics; IOP Measurement Procedure; Emergency History Check

model name [MHC-V4D]
[4-540-486-12(1)] GB
29
GB
filename[D:\NORM'S JOB\SONY HA\SO140051\MHC-V4D_PMRF
02\4540486121_GB\060CDP.fm]
masterpage:Right
Disc/USB Playback
[SCORE MODE]
Select the scoring mode to rate your
singing when in Karaoke Mode.
[
BEGINNER 1]: Beginner level. The
score is displayed while singing.
[BEGINNER 2]: Beginner level.
[EXPERT 1]: Advance level. The score
is displayed while singing.
[EXPERT 2]: Advance level.
[DEMO]: Demonstration mode. The
score is displayed regardless of singing.
[A/V SYNC]
(Video files only)
Adjusts the delay between the picture and
sound.
[OFF]
: Does not adjust.
[ON]: Adjusts the difference between
picture and sound.
[DOWNMIX]
Select the audio output signal for playing
a multi-channel audio.
[NORMAL]
: Output multi-channel
audio into a 2-channel stereo signal.
[DOLBY SURROUND]: Output multi-
channel audio into a 2-channel surround
signal.
[SCREEN SAVER]
The screen saver will help prevent your
display device from becoming damaged
(ghosting). Press any button to cancel the
screen saver.
[ON]
: The screen saver image appears if
you do not operate the system for about
15 minutes.
[OFF]: Off.
[BACKGROUND]
Selects the background color or picture to
be displayed on the TV screen.
[JACKET PICTURE]
: The jacket
picture (still picture) appears in the
background, but only when the jacket
picture is already recorded on the disc.
[GRAPHICS]: A preset picture stored in
the system appears in the background.
[BLUE]: The background color is blue.
[BLACK]: The background color is
black.
[PARENTAL CONTROL]
Sets the playback restrictions. For details,
see “Restricting playback of the disc”
(page 24).
[MULTI-DISC RESUME]
[
ON]: Stores the resume playback point
in the memory for up to 6 discs.
[OFF]: Does not store the resume
playback point in the memory. Playback
starts at the resume playback point only
for the current disc in the system.
[RESET]
Returns “SETUP” settings (except for
“PARENTAL CONTROL” settings) to
the default settings. For details, see
“Returning the “SETUP” settings to the
default” (page 48).
Setting the system –
[SYSTEM SETUP]