model name [MHC-V4D]
[4-540-486-12(1)] GB
39
GB
filename[D:\NORM'S JOB\SONY HA\SO140051\MHC-V4D_PMRF
02\4540486121_GB\080SND.fm]
masterpage:Right
Creating your own
sound effect
You can raise or lower the levels of
specific frequency bands, then store the
setting in the memory as “CUSTOM EQ”.
1 Press OPTIONS.
2 Press / repeatedly to select
“EQ EDIT”, then press .
3 Press / repeatedly to adjust
the equalizer level, then press
.
4 Repeat step 3 to adjust the level
of other frequency bands and
surround effect.
To exit the options menu, press
OPTIONS.
To select the custom equalizer
setting
Press MUSIC repeatedly to select
“CUSTOM EQ”.
Creating a party
atmosphere
(DJ EFFECT)
1 Press DJ EFFECT repeatedly to
select the effect type.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocals.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
• WAH: Create a special effect of
“Wah-wah” sound by moving the
frequency of a filter up and down
automatically.
2 Press DJ CONTROL +/– to adjust
the effect level.
To turn off the effect
Press DJ EFFECT repeatedly to select
“DJ OFF”.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system or change the
function.
• If you activate the DJ EFFECT during
transfer, the sound effect will not be
transferred to the USB device.
• You cannot use VOLUME/DJ CONTROL on
the unit to adjust the volume when the DJ
EFFECT is activated.
Press VOL +/– on the remote control to adjust
the volume.
Frequency band
Equalizer level
To Next Page
Loading...
Need help?
General
Weight and Dimensions
