model name [MHC-V4D]
[4-540-486-12(1)] GB
34
GB
filename[D:\NORM'S JOB\SONY HA\SO140051\MHC-V4D_PMRF
02\4540486121_GB\070TUN.fm]
masterpage:Left
Setting the Bluetooth
audio codecs
You can receive data in AAC codec
format from a Bluetooth device.
1 Press OPTIONS.
2 Press / repeatedly to select
“BT AAC”, then press .
3 Press / repeatedly to select
“ON” or “OFF”, then press .
• ON: Enable reception in AAC codec
format.
• OFF: Receive in SBC codec format.
To exit the options menu, press
OPTIONS.
Notes
• You can enjoy high quality sound if the AAC
is selected. In case you cannot listen to AAC
sound from your device, select “OFF”.
• If you change this setting while the system is
connected to a Bluetooth device, the
Bluetooth device will be disconnected. To
connect to the Bluetooth device, perform the
Bluetooth connection again.
• If the sound is interrupted in AAC codec
format, select “OFF” to cancel the setting. In
this case, the system receives SBC codec.
Connecting a
smartphone with one
touch (NFC)
What is “NFC”?
NFC (Near Field Communication) is a
technology enabling short-range wireless
communication between various devices,
such as smartphones and IC tags. Thanks
to the NFC function, data communication
can be achieved easily just by touching
the designated touchpoint on the NFC-
compatible devices.
When you touch the system with an NFC-
compatible smartphone, the system
automatically:
– turns on in Bluetooth function.
– completes pairing.
– completes the Bluetooth connection.
1 Download and install the “NFC
Easy Connect” app.
Download the free Android app from
Google Play by searching for “NFC
Easy Connect” or access it by using the
two-dimensional code below. Data
communication fees may be charged.
Two-dimensional code* for
direct access
* Use a two-dimensional code reader app.
Notes
• The app may not be available in some
countries/regions.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
