EasyManuals Logo

Sony MHC-V4D Operating Instructions

Sony MHC-V4D
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
model name [MHC-V4D]
[4-540-486-12(1)] GB
37
GB
filename[D:\NORM'S JOB\SONY HA\SO140051\MHC-V4D_PMRF
02\4540486121_GB\070TUN.fm]
masterpage:Right
Bluetooth
To disconnect the Bluetooth device
Press BLUETOOTH on the unit.
“BT AUDIO” appears in the display
panel.
Depending on the Bluetooth device, the
Bluetooth connection may be canceled
automatically when you stop playback.
Use the buttons on the unit to perform this
operation.
1 Press BLUETOOTH to select
Bluetooth function.
“BT AUDIO” appears in the display
panel.
If the system is connected to a
Bluetooth device, the Bluetooth device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth device.
2 Hold down X and DJ EFFECT for
about 3 seconds.
“BT HIST CLEAR” appears in the
display panel and all the pairing
information is erased.
Setting the Bluetooth
standby mode
The Bluetooth standby mode enables the
system to turn on automatically when you
establish the Bluetooth connection from a
Bluetooth device.
1 Press OPTIONS.
2 Press / repeatedly to select
“BT STBY”, then press .
3 Press / repeatedly to select
“ON” or “OFF”, then press .
4 Press "/1 to turn off the system.
When Bluetooth standby mode is set to
on, the system waits for a Bluetooth
connection even when the system has
been turned off. When a Bluetooth
connection is established, the system
turns on automatically.
Setting the Bluetooth
signal
You can connect to the system from a
paired Bluetooth device in all functions
when Bluetooth signal is set to on. The
Bluetooth signal is turned on by default.
Use the buttons on the unit to perform this
operation.
Hold down X and + for about
3 seconds.
“BT ON” or “BT OFF” appears in the
display panel.
Notes
You cannot perform the following operations
when Bluetooth signal is set to off:
Pairing with Bluetooth device
Erasing the pairing information
Using “SongPal” via Bluetooth
When the Bluetooth signal is set to off, this
system cannot be detected and connection
cannot be established from Bluetooth device.
If you touch the system with an NFC-
compatible smartphone or set the Bluetooth
standby mode to on, the Bluetooth signals will
set to on automatically.
Erasing all the pairing
registration information

Other manuals for Sony MHC-V4D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MHC-V4D and is the answer not in the manual?

Sony MHC-V4D Specifications

General IconGeneral
TypeHome audio mini system
Cassette deckNo
Product colorBlack
Optical disc playerYes
Number of optical discs1 discs
Bass reflex-
Speaker type3-way
RMS rated power720 W
Woofer diameter200 mm
Tweeter diameter40 mm
Number of speakers5
Mid-range driver diameter100 mm
Equalizer modesCustom, Pop, Flat, Rap, Rock
FM band range87.5 - 108 MHz
Supported radio bandsFM
Power sourceAC
Input voltage120-240 V
Input frequency50 - 60 Hz
Composite video out1
Apple docking compatibilityNot supported
On Screen Display (OSD) languagesEnglish
Playback modesProgram, Shuffle, Repeat, Normal
Audio formats supportedWMA, MP3
Display typeLCD
Weight and Dimensions IconWeight and Dimensions
Depth295 mm
Width280 mm
Height780 mm

Related product manuals