20
Moving recorded tracks
You can change the order of the recorded
tracks.
1234
Before moving
Track A Track B Track C Track D
$
After
moving
Track A Track C Track B Track D
1234
Move track C
from the third to
the second track.
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
1234
4
123
Track numbers decrease
.
Erase a track mark
P•CAPS
T MARK•CANCEL
(at the bottom)
=
1 While playing the track with the track
mark you want to erase, press P to
pause.
2 Find the track mark by pressing =
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
=
T MARK•CANCEL
p•CHARGE
(•ENTER
3 Press T MARK to erase the mark.
“T. OFF” appears in the display. The
track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the name
assigned to the mark are also erased.
P•CAPS
DISPLAY•EDIT•INSERT
(at the bottom)
T MARK•CANCEL
(at the bottom)
= +
To Next Page
Loading...
