Sony MZ-R700 - Specific DC Motor Component Disassembly

11
MZ-G750/R700
4 two screws(M1.4),
precision pan
5 moter, DC (sled) (M602)
3 Remove four solders of
motor flexible board.
1 washer (0.8 - 2.5)
2 gear (SA)
1 Remove six solders of
motor flexible board.
4 three screws(M1.4),
precision pan
qs moter, DC (over write head up/down)
(M603)
6 two screws(M1.4),
precision pan
qa chassis assy, gear
0 screw
(M1.2
× 1.5)
9 gear (HA)
8 gear (HB)
7 washer (0.8 - 2.5)
2 washer (0.8 - 2.5)
3 gear (HC)
5 moter, DC
(spindle)
(M601)
DC motor
(over write head up/down)
(M603)
gear chassis assy
gear (HA)
2.65 mm
Note: Press-fit the gear (HA) up to the
position of the DC motor (over write
head up/down) (M603) as shown
below.
3-9. MOTOR, DC (M602)
3-10. “MOTOR, DC (M601)”, “MOTOR, DC (M603)”