17
Recording an MD right away!
(Synchro-recording)
This section explains the basic procedure for making digital
recordings using an optical cable connected to a CD player, Digital
TV or other digital equipment. (For further information, see “System
limitations” (page 52)) During synchro-recording, the recorder starts
and stops recording in sync with the sound source. Track marks are
added wherever they appear in the sound source. It is recommended to
use the AC power adaptor when recording.
To record from an analog source such as a cassette deck or a radio t “Recording in analog
(Analog Recording)” (page 25).
To record using group mode t “Recording tracks using the group function (Group Mode
Recording)” (page 27).
1
Insert an MD.
(Use a recordable MD for recording)
Before you open the MD disc lid, open the buckle first.
1 Slide the OPEN switch to the direction
of the arrow shown in the illustration
below.
2 Insert an MD with the label side facing
front, and press the lid down to close.
Make sure to check the record-
protect tab is closed.
continued
To Next Page
Loading...
Need help?
General
