32
Checking the remaining
recordable time
You can check the remaining time, track
number, etc. when recording or during
stop. Group-related items appear only
when a track with group settings is played
and then stopped.
1 While the recorder is recording or
stopped, press MENU.
2 Press . or > repeatedly until
“DISP” flashes in the display, and
then press ENTER again.
3 Press . or > repeatedly until
the information you want flashes in
the display.
Each time you press >, the display
changes as follows:
Display window on the recorder
On B
LapTim
The elapsed time of the current
track.
r
RecRem
The remaining recordable time.
r
GP Rem
The remaining time after the current
track in a group.
r
AllRem
The remaining time after the current
location.
Note
Items may not be selectable depending on
group mode’s on/off status or the recorder’s
operating status.
4 Press ENTER.
The information selected in step 3
appears in A and B.
A — track number, track name,
group name, or disc name.
B — the information selected in step
3.
Note
Items may appear differently depending on
group mode’s on/off status, the recorder’s
operating status, or the recorder settings.
z
If you want to check the playing position or
track name while playing, see page 36.
MENU/ENTER
Control key
(./>)
To Next Page
Loading...
