23
Getting Started
Set the date and time when you use your
camcorder for the first time.
z Tips
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 124).
When you set the date and time again, press
the MENU button, and select
(OTHERS) t [CLOCK SET].
1 Select your area by turning the
SEL/PUSH EXEC dial, then press
the dial.
2 Set [SUMMERTIME], [Y] (year),
[M] (month), [D] (day), hour and
minute, by turning the SEL/PUSH
EXEC dial, then press the dial.
The clock starts.
• Set [SUMMERTIME] to [ON] to move the
time forward 1 hour.
• You can set any year up to the year 2037.
• Midnight is indicated as 12:00 AM, and
noon as 12:00 PM (NTSC model).
z Tips
• The date and time are automatically recorded on
the selected recording media, and can be
displayed during playback (DATA CODE
button, p. 69).
You can change the on-screen displays to
show messages in a specified language.
Press the MENU button and select
(OTHERS) with the SEL/PUSH
EXEC dial. Select the screen language in
[LANGUAGE] (p. 100).
Setting the date and time
SEL/PUSH EXEC
dial
MENU button
Changing the language setting
To Next Page
Loading...
Need help?
General