When no audio input continues for 2 seconds, flashing appears on the display window and the linear PCM
recorder pauses. When audio input resumes, it restarts recording, saving the audio to a new file.
Hint
If the input audio volume is not loud enough, connect your linear PCM recorder to the headphones jack (stereo mini-jack) on the
external device with an audio connection cable, and then adjust the volume of the external device while checking the peak level
meters on the linear PCM recorder's display window for the recording volume level. For more information, see About the peak
level meters.
If you attempt to start synchronized recording while recording is already in progress, the linear PCM recorder will stop recording.
Repeat steps 4 and 5 once again.
During synchronized recording, you cannot use the Rehearsal function. Manually adjust the sensitivity.
Related Topic
Recording the playback audio of the linear PCM recorder on an external device
Recording without using the synchronized recording function
4-740-912-31(2) Copyright 2018 Sony Corporation
appears and the linear PCM recorder starts synchronized recording.
To Next Page
Loading...
