Setup Menu List
83
Menu Configuration and Detailed Settings
Interval Rec
Setting the Interval
Recording
function
Setting
On / Off
Turn the Interval Recording function on/off.
Interval Time
1 to 10/15/20/30/40/50 sec
1 to 10/15/20/30/40/50 min
1 to 4/6/12/24 hour
Set the interval of recording in Interval Recording.
Number of Frames
1 / 3 / 6 / 9 or
2 / 6 / 12 (When using 720/
59.94P or 720/50P)
Set the number of frames to be recorded at a time in Interval
Recording.
Frame Rec
Setting the Frame
Recording
function
Setting
On / Off
Turn the Frame Recording function on/off.
Number of Frames
1 / 3 / 6 / 9 or
2 / 6 / 12 (When using 720/
59.94P or 720/50P)
Set the number of frames to be recorded at a time in Frame
Recording.
Clip Cont. Rec
Setting the Clip
Continuous
Recording
function
Setting
On / Off
Turn the Clip Continuous Recording function on/off.
P.Cache Rec
Setting the Picture
Cache Recording
function
Setting
On / Off
Turn the Picture Cache Recording function on/off.
Rec Time
0-2sec / 2-4sec / 4-6sec /
6-8sec / 8-10sec / 13-15sec
Set the time to cache video in the picture cache memory (the
time to a point where recording is to start when you press the
REC START/STOP button in Picture Cache Recording).
S&Q Motion
Setting the Slow &
Quick Motion
function
Unselectable while
“EX Slow Shutter”
is set (PMW-200
only).
Setting
On / Off
Turn the Slow and Quick Motion function on/off.
Frame Rate
1 to 60 (When using FAT mode
and 720p. When using UDF
mode and 720 59.94p/720
29.97p/720 23.98p.)
1 to 50 (When using UDF mode
and 720 50p/720 25p.)
1 to 30 (When using FAT mode
and 1080p. When using UDF
mode and 1080 29.97p/1080
23.98p.)
1 to 25 (When using UDF mode
and 1080 25p.)
(NTSC : 30, PAL : 25)
Set the recording frame rate for Slow & Quick Motion mode.
The setting value range varies depending on the selection
region and video format.
Rec Review
Setting the
playback time for
Rec-Review
3 sec / 10 sec / Clip Set the time to play the last recorded clip using the Rec-
Review function.
3 sec: Last 3 seconds
10 sec: Last 10 seconds
Clip: Entire duration of the clip
CAMERA SET
Menu items Subitems and setting values Contents
To Next Page
Loading...
