Sony PMW-200 - Page 84

Setup Menu List
84
Menu Configuration and Detailed Settings
TLCS
Setting the Total
Level Control
System (auto
adjustment system
of gain, exposure
and shutter)
Level
+1.0 / +0.5 / ±0 / –0.5 / –1.0
Set the target level (to make brighter or darker) of auto iris
(PMW-200)/auto exposure (PMW-100) control in TLCS.
(This setting also affects the gain control in AGC mode and
shutter-speed control in Auto Shutter mode.)
+1.0: Approx. one stop further open
+0.5: Approx. half a stop further open
±0: Standard
–0.5: Approx. half a stop further closed
–1.0: Approx. one stop further closed
Mode
Backlight / Standard /
Spotlight
Set the auto iris (PMW-200)/auto exposure (PMW-100)
control mode in TLCS.
Backlight: Backlight mode to reduce darkening of the center
subject against lights
Standard: Standard mode
Spotlight: Spotlight mode to reduce blown-out highlights on
the center subject in the spotlight
Speed
–99 to +99 (+50)
Set the tracing speed of TLCS control.
AGC
On / Off
Turn the AGC (Auto Gain Control) function on/off.
AGC Limit
PMW-200: 3 / 6 / 9 / 12 / 18 dB
PMW-100: 3 / 6 / 9 / 12 / 18 dB
Set the maximum gain in AGC.
AGC Point
PMW-200: F2.8 / F4 / F5.6
PMW-100: E98 / E95 / E92 /
E77
PMW-200: Set the iris point for switching to auto-iris and
AGC (Auto Gain Control) control when AGC is on.
PMW-100: Set the exposure position for switching to auto
exposure and AGC (Auto Gain Control) control when
AGC is on.
Note
If you select E77 using AGC Point when A.SHT Point is
set to E87 or E82, A.SHT Point will be changed to E77.
Auto Shutter
On / Off
Turn the Auto Shutter control function on/off.
A.SHT Limit
PMW-100: PMW-200:
1/100 1/100
1/125 1/150
1/250 1/200
1/500 1/250
Set the maximum shutter speed in Auto Shutter control.
A.SHT Point
PMW-200: F5.6 / F8 / F11 /
F16
PMW-100: E87 / E82 / E77 /
E72
Set the exposure position for switching auto iris (PMW-200)/
auto exposure (PMW-100) and auto shutter control when
Auto Shutter is on.
Note
When AGC Point is set to E77, only the menu item E77 or
E72 of A.SHT Point is available. (PMW-100 only)
Shockless
White
Setting the
shockless white
balance
Off / 1 / 2 / 3 Select the speed of change in white balance when the white
balance mode is switched. Set to “Off” to instantly change the
white balance.
Select a larger number to change the white balance more
slowly through interpolation.
CAMERA SET
Menu items Subitems and setting values Contents