Sony PMW-EX1R Service Manual

1 (E)
PMW-EX1R
Table of Contents
Manual Structure
Purpose of this manual ............................................................ 3 (E)
Related manuals ...................................................................... 3 (E)
1. Service Overview
1-1. External Connectors ..................................................1-1 (E)
1-1-1. Signal Inputs and Outputs ................................1-1 (E)
1-2. Location of the Printed Wiring Boards .....................1-3 (E)
1-3. Circuit Description ....................................................1-4 (E)
1-4. Service Tools/Measuring Equipment List ............... 1-12 (E)
1-4-1. Service Tools ..................................................1-12 (E)
1-4-2. Measuring Equipment ....................................1-12 (E)
1-5. Firmware Upgrade...................................................1-13 (E)
1-6. Recommended Replacement Parts .......................... 1-14 (E)
1-7. Circuit Protection Part List ......................................1-15 (E)
1-7-1. Circuit Protection Element.............................1-15 (E)
1-7-2. Replacing Fuse ...............................................1-15 (E)
1-8. Note on Service .......................................................1-16 (E)
1-8-1. Requirements on Replacement of Boards
or Parts ...........................................................1-16 (E)
1-8-2. Requirements on Replacement of Lens ......... 1-16 (E)
1-8-3. Note on Replacement of Parts on
the Board ........................................................ 1-16 (E)
1-8-4. Description of Number Seal on the Prism ..... 1-16 (E)
1-8-5. Memory Backup Battery ................................1-17 (E)
1-8-6. Unleaded Solder .............................................1-17 (E)
1-9. Connector Location Diagram on Board .................. 1-18 (E)
1-10. Connecting/Disconnecting the Flexible
Card Wire ................................................................1-19 (E)
1-11. Replacing the Coaxial Cable with Connector
(Fine Pitch Coaxial Cable) .......................................... 1-20 (E)
2. Replacement of Main Parts
2-1. Outline of Replacement Procedures ......................... 2-1 (E)
2-2. Replacement Procedures ...........................................2-2 (E)
2-2-1. Lithium Battery ............................................... 2-2 (E)
2-2-2. Case (Bottom) L/R and Front Panel
Assembly .........................................................2-2 (E)
2-2-3. Microphone Holder Assembly ........................2-4 (E)
2-2-4. EVF Assembly .................................................2-4 (E)
2-2-5. Handle Assembly .............................................2-5 (E)
2-2-6. DAP-41 Board and AU-326 Board ..................2-7 (E)
2-2-7. SW-1478 Board................................................2-8 (E)
2-2-8. Inside Panel Assembly/Outside Panel
Assembly .........................................................2-8 (E)
2-2-9. Rear Panel Assembly .....................................2-10 (E)
2-2-10. Express Card Assembly ................................. 2-11 (E)
2-2-11. RE-272 Board and RE-273 Board ................. 2-12 (E)
2-2-12. Battery Case, TX-131 Board .........................2-13 (E)
2-2-13. DPR-311 Board ..............................................2-15 (E)
2-2-14. Case L Assembly............................................ 2-16 (E)
2-2-15. Case R ............................................................2-17 (E)
2-2-16. Prism Assembly .............................................2-18 (E)
2-2-17. ND Filter ........................................................2-18 (E)
2-2-18. Lens Unit........................................................2-19 (E)
2-2-19. DR-644 Board ................................................ 2-19 (E)
2-2-20. LED-491 Board..............................................2-20 (E)
2-2-21. Speaker...........................................................2-20 (E)
2-2-22. KSW-55 Board, HN-361 Board .....................2-21 (E)
2-2-23. Microphone Unit Assembly ...........................2-22 (E)
2-2-24. Microphone Unit ............................................ 2-23 (E)
2-2-25. DET-52 Board ................................................2-24 (E)
2-2-26. 3.5-inch LCD Assembly ................................2-25 (E)
2-2-27. Replacing the Parts in the Lens Grip ............. 2-26 (E)
3. SERVICE Menu
3-1. Outline of SERVICE Menu .......................................3-1 (E)
3-1-1. Basic Menu Operations ....................................3-1 (E)
3-1-2. SERVICE Menu Structure ...............................3-1 (E)
3-1-3. Displaying the SERVICE Menu ......................3-1 (E)
3-2. SERVICE Menu List .................................................3-2 (E)
3-2-1. MAINTENANCE Menu .................................. 3-2 (E)
3-2-2. RPN CORRECT Menu ....................................3-2 (E)
3-2-3. INFORMATION Menu ...................................3-3 (E)
3-3. Self-Diagnostic Function...........................................3-4 (E)
3-4. Executing Log Dump ................................................ 3-9 (E)
3-5. List of Error Numbers on the LCD Display ............ 3-10 (E)

Sony PMW-EX1R Specifications

General

Sensor type	CMOS
Total megapixels	- MP
Filter size	77 mm
Digital zoom	- x
Optical zoom	14 x
Image stabilizer	Yes
Focal length range	5.8 - 81.2 mm
Focal length (35mm film equivalent)	31.4 - 439 mm
Camcorder media type	HDD, Memory card
Internal storage capacity	32 GB
Focus adjustment	Auto/Manual
Camera shutter speed	1/32 - 1/2000 s
Display diagonal	3.5 \
Display resolution	640 x 480 pixels
Display resolution (numeric)	921000 pixels
Viewfinder screen size	0.45 \
Product color	Black
Minimum illumination	0.14 lx
Video formats supported	MPEG2
Maximum video resolution	1920 x 1080 pixels
Analog signal format system	NTSC, PAL
PCM digital audio	16-bit/48 kHz
USB connector type	Mini-USB B
USB 2.0 ports quantity	1
Battery life (max)	3 h
Video recording time	1.6 h
Operating temperature (T-T)	0 - 40 °C
Cables included	USB
Power requirements	12 V DC

Weight and Dimensions

Depth	199 mm
Width	179 mm
Height	308 mm
Weight	2400 g