PRS-950
9
2-11. MAIN BOARD
Note 1: When the MAIN board is removed, refer to “Wi-Fi OPERATION CHECK” (page 3).
1 ink indicator element
flexible board
3
6 twelve shafts
(M1.4 u 1.8)
– Rear side view (bottom side) –
4 WWAN antenna cable
chassis
WWAN antenna
MAIN board
1 + 1 (-0) mm 1 + 1 (-0) mm
mounted parts mounted parts
sheet (antenna)
:ire SroFessiQJ
7 two tapping screws
8
9 FL5033 flexible board (FPC1)
FL5033 flexible
board (FPC1)
0 MAIN board
to MAIN board
to LED board
Note 5: Please note the direction when you
install FL5033 flexible board (FPC1).
2 sheet (antenna)
Note 3:
When pasting sheet (antenna), please let me
stick to MAIN board rubbing on several times.
5 Peel the aluminum tape.
Note 4:
When pasting aluminum
tape, please let me stick to
MAIN board rubbing on
several times.
5 Peel the aluminum tape.
Note 4:
When pasteing aluminum tape, please let me
stick to MAIN board rubbing on several times.
WWAN antenna cable
Note 2:
Please take care not to run aground in the chassis.
To Next Page
