000
3. Shooting: Basic Operation Procedure
32
Switching Between XQD Memory
Cards
When two XQD memory cards are inserted, press
the SLOT SELECT button (page 6) to switch
cards.
[Note]
You cannot switch between memory cards during playback
mode. Also, continuous playback of a clip spanning media in
slot A and slot B is not supported.
Clips (recorded data)
When you stop recording, the video, audio, and
accompanying data from the start to the end of
the recording are saved as a single “clip” on an
XQD memory card.
Clip names
Each clip recorded by the camcorder is
automatically assigned a clip name comprising
the word “Clip” and a 4-digit number. The 4-digit
number automatically increments with each
recording.
You can change the “Clip” prefix using Clip in the
Media menu.
Maximum clip duration
Up to 6 hours per clip.
Multiple clips are recorded in succession
during relay recording, but recording will stop
automatically after approximately 13 hours.
To Next Page
