Sony PXW-FS7M2 - Page 58

000
5. Menu Display and Settings: Setup Menu List
58
Paint >Matrix
Sets matrix correction settings.
Item Sub-item setting Description
Adaptive
Matrix
On / Off Turns the adaptive matrix function on/off.
Preset Matrix On / Off Turns the preset matrix function on/off.
Preset Select Standard
High Saturation
FL Light
Cinema
F55 709 Like
BT.2020
Selects a preset matrix.
[Notes]

BT.2020 can be selected only when the
recording format is 4K or QFHD.

For details about the color gamut of each video
output when BT.2020 is selected, see “Output
Menu Settings and Video Output Color Space
when Preset Select is BT.2020” (page 86).

The following two types of signals have BT.2020
matrix correction enabled when BT.2020 is
selected.
– BT.2020 output signals described in “Output
Menu Settings and Video Output Color Space
when Preset Select is BT.2020” (page 86).
– Video recorded in 4K or QFHD
ITU-R BT.709 equivalent matrix correction is
invoked for BT.709 output signals in “Output
Menu Settings and Video Output Color Space
when Preset Select is BT.2020” (page 86).
User Matrix On / Off Turns the user matrix correction function on/
off.
Level –99 to +99 (±0) Adjusts the color saturation of the entire
image.
Phase –99 to +99 (±0) Adjusts the color tone (phase) of the entire
image.
User Matrix
R-G
–99 to +99 (±0) Sets a user-defined R-G user matrix.
User Matrix R-B –99 to +99 (±0) Sets a user-defined R-B user matrix.
User Matrix
G-R
–99 to +99 (±0) Sets a user-defined G-R user matrix.
User Matrix
G-B
–99 to +99 (±0) Sets a user-defined G-B user matrix.
User Matrix B-R –99 to +99 (±0) Sets a user-defined B-R user matrix.
User Matrix
B-G
–99 to +99 (±0) Sets a user-defined B-G user matrix.
Paint >Multi Matrix
Sets multi matrix correction settings.
Item Sub-item setting Description
Setting On / Off Turns the multi matrix correction function
on/off.
Area Indication On / Off Turns the area indication function on/off.
Color
Detection
Execute / Cancel Detects the color used for multi matrix
correction.
Axis B / B+ / MG– / MG / MG+ / R / R+ / YL– / YL /
YL+ / G– / G / G+ / CY / CY+ / B–
Selects the axis.
Hue –99 to +99 (±0) Sets the hue of the color used for multi
matrix correction.
Saturation –99 to +99 (±0) Sets the saturation of the color used for multi
matrix correction.
Paint >Maintenance
Sets maintenance settings.
Item Sub-item setting Description
Test Saw On / Off Turns the test signal on/off.
Audio Menu
Refer to “Block Diagrams” (page 95).
Audio >Audio Input
Sets audio input settings.
Item Sub-item setting Description
CH1 Input
Select
INPUT1 / Internal MIC / Shoe 1 Switches the input source for recording on
channel 1.
CH2 Input
Select
INPUT1 / INPUT2 / Internal MIC / Shoe 2 Switches the input source for recording on
channel 2.
CH3 Input
Select
Off / Internal MIC / Shoe 1 Switches the input source for recording on
channel 3.
CH4 Input
Select
Off / Internal MIC / Shoe 2 Switches the input source for recording on
channel 4.
INPUT1 MIC
Reference
–60dB / –50dB / –40dB Sets the reference recording level for XLR
microphone input from INPUT1.