Sony PXW-FS7M2 - Page 64

000
5. Menu Display and Settings: Setup Menu List
64
VF >Display On/Off
Sets display item settings.
Item Sub-item setting Description
GPS On / Off Selects the items to display in the viewfinder.
Level Gauge On / Off
Lens Info Meter / Feet / Off
Notice
Message
On / Off
VF >Video Signal Monitor
Sets video signal monitor settings (page 39).
Item Sub-item setting Description
Setting Off / Waveform / Vector / Histogram Sets the type of video signal monitor.
[Tip]
Not displayed when Display On/Off >Setting is set
to Off.
Source In Custom mode, when Preset Select is set to
BT.2020, video output resolution is 2K or lower,
and Color Output Space is set to SDI2 BT.709:
or
In Cine EI mode with video output resolution
2K or lower:
SDI1 & Internal Rec / SDI2
Sets the measurement target of the video
signal monitor.
Displays the measurement target if not
configurable.
TC/UB Menu
TC/UB >Timecode
Sets timecode settings.
Item Sub-item setting Description
Mode Preset / Regen / Clock Sets the timecode running mode.
Preset:
Starts running from a preset value.
Regen:
Starts running from the timecode of the
end of the previous clip.
Clock:
Uses the internal clock as the timecode.
TC/UB >Timecode
Sets timecode settings.
Item Sub-item setting Description
Run Rec Run / Free Run Rec Run: Runs only when recording.
Free Run: Always running, regardless of
camcorder operation.
Setting Sets the timecode to an arbitrary value.
SET: Set the value.
Reset Execute / Cancel Resets the timecode to 00:00:00:00.
Execute: Reset timecode
TC Format DF / NDF Sets the timecode format.
DF: Drop Frame
NDF: Non-Drop Frame
TC/UB >TC Display
Sets time data display settings.
Item Sub-item setting Description
Display Select Timecode / Users Bit / Duration Switches the time data display.
TC/UB >Users Bit
Sets settings related to user bits.
Item Sub-item setting Description
Mode Fix / Time Sets the user bit mode.
Fix: Uses an arbitrary fixed value in user bits.
Time: Uses the current time in user bits.
Setting Sets the user bits to an arbitrary value.
TC/UB >HDMI TC Out
Sets settings related to timecode output when using HDMI.
Item Sub-item setting Description
Setting On / Off Sets whether to output the timecode to
devices for other purposes, using HDMI.