Sony RDP-XA700iP User Manual

11
US
Press the ?/1 button
The ?/1 indicator starts flashing. You can
operate the unit when the ?/1 indicator stops
flashing and lights up green.
The LINK indicator also starts flashing. You
can set up or use the “AirPlay” function when
it stops flashing.
It may take a while for these indicators to stop
flashing.
Note
After playback of the connected device has finished,
if no operation is performed for about 20 minutes,
the unit will automatically enter standby/network
standby mode.
Turning on the unit

Sony RDP-XA700iP Specifications

General

Product color	Black
Volume control	Digital
Indication light	Yes
Dimensions (WxDxH)	401 x 176 x 160 mm
Impedance	8 Ω
Driver diameter	48 mm
Frequency range	- Hz
RMS rated power	60 W
Audio output channels	2.1 channels
Bluetooth	No
Headphone connectivity	-
Apple docking compatibility	iPad, iPhone, iPod
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 Hz

Weight and Dimensions

Depth	160 mm
Width	401 mm
Height	176 mm
Weight	3300 g