Sony RDP-XA700iP User Manual

15
US
About the LINK indicator
Tips
• You can also connect the unit to your wireless or
wired network by other methods including Manual
Setup, WPS PIN, etc.
• You can set up Fixed IP, as required.
• You can set up a Proxy Server, as required.
When a problem occurs while you
are making the network settings
Press and hold the ALL RESET button on the
rear of the unit with a thin object such as a
small pin (page 8).
Note
Once you press and hold the ALL RESET button,
the settings of the unit are reset to the factory default
settings.
Lights up green.
(Green)
The Wi-Fi network
connection is established.
Flashes green.
(Green)
This unit is in the process of
connecting to the Wi-Fi
network.
Please wait.
Lights up amber.
(Amber)
The wired network
connection is established.
Flashes amber.
(Amber)
This unit is in the process of
connecting to the wired
network.
Please wait.
Flashes red k Lights up red
(Red)
An error has occurred.
Try again from the
beginning, or adjust your
network settings.
The indicator turns off.
(Nothing)
No connection is
established.

Sony RDP-XA700iP Specifications

General

Product color	Black
Volume control	Digital
Indication light	Yes
Dimensions (WxDxH)	401 x 176 x 160 mm
Impedance	8 Ω
Driver diameter	48 mm
Frequency range	- Hz
RMS rated power	60 W
Audio output channels	2.1 channels
Bluetooth	No
Headphone connectivity	-
Apple docking compatibility	iPad, iPhone, iPod
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 Hz

Weight and Dimensions

Depth	160 mm
Width	401 mm
Height	176 mm
Weight	3300 g